11 District Tournaments

Teams advance through the season depending on the events at which they compete: Regional or District. This section details how District teams advance from District qualifying events to their District Championship.

11.1 District Events

District teams are ranked throughout the season based on the points they earn at the first 2 home District events they attend, as well as at their District Championship. Points are awarded to teams as follows:

Category	Points
Qualification Round Performance	(For a typically sized District event, this will result in a minimum of 4 points being awarded for Qualification round performance. For events of all sizes, a maximum of 22 points will be awarded.)
ALLIANCE CAPTAINS	Equal to 17 minus the ALLIANCE CAPTAIN number (e.g. 14 points for ALLIANCE #3 Captain)
Draft Order Acceptance	Equal to 17 minus the Draft Order Acceptance Number (e.g. 12 points for the team that accepts the fifth draft position, regardless of whether it was delayed per T605.)
Playoff Advancement	Points awarded based on team participation in individual playoff rounds, and whether or not the ALLIANCE advances. See section 11.1.3 Playoff Performance for details.
Judged Team Awards	10 points for FIRST Impact Award 8 points each for Engineering Inspiration and Rookie All Star Awards 5 points each for all other judged team awards
Team Age	10 points for 2025 rookie teams 5 points for 2024 rookie teams

Points earned at District Championships are multiplied by 3 and then added to points earned at District events, to determine the final season point total for the team.

If there is a tie in the season point total between teams, the higher ranked team will be determined using the following additional sorting criteria:

Order Sort	Criteria
1st	Total Playoff Performance Points
2nd	Best Playoff Points at a single event
3rd	Total ALLIANCE Selection Results Points
4th	Highest Qualification Round Seed or Draft Order Acceptance (i.e. Highest ALLIANCE Selection points at a single event)
5th	Total Qualification Round Performance Points
6th	Highest Individual MATCH Score, regardless of whether that score occurred in a Qualification or Playoff MATCH
7th	Second highest Individual MATCH Score, regardless of whether that score occurred in a Qualification or Playoff MATCH
8th	Third highest Individual MATCH Score, regardless of whether that score occurred in a Qualification or Playoff MATCH
9th	Random Selection

11.1.1 Qualification Round Performance

The calculation of Qualification performance points is done using the equation (an inverse error function) in Table 11‑1. The equation utilizes the following variables:

• R
  – the qualification rank of the team at the event at the conclusion of Qualification
  MATCHES
  (as reported by
  FMS
  )
• N – the number of FIRST Robotics Competition teams participating in the Qualification rounds at the event
• Alpha (α) – a static value (1.07) used to standardize the distribution of points at events

This formula generates an approximately normal distribution of Qualification Round Performance points at an event, based on rank, with most teams getting a moderate number of points, and fewer teams getting the highest or lowest numbers of points available.

Table 11‑3 displays sample Qualification Round Performance points for variously ranked teams at a 40-team event. The system will automatically generate the appropriate points for each team based on their rank and the number of teams at the event.

Rank	1	2	3	4	…	19	20	21	…	37	38	39	40
Points	22	21	20	19	…	13	13	12	…	6	6	5	4

11.1.2

ALLIANCE

Selection Results

This attribute measures both individual team qualification round seeding performance and recognition by peers.

CAPTAINS are recognized based on their qualification round seeding rank. This rank is a result of the rules of the game, which typically incorporate several team performance attributes, and are designed to eliminate ties in rank. Non-ALLIANCE CAPTAINS are rewarded based on peer recognition. To be invited to join an , a team’s peers have decided that the team has attributes that are desirable. Giving points for selection also supports come-from-behind teams. A team taking several to optimize their performance may be recognized as a late bloomer by a top seeded team, even if that performance isn’t reflected in the rankings because of poor performance in early . These points also have the potential to recognize teams employing a minority strategy with their . Teams with unique or divergent capabilities that complement the strengths of other members may be selected to fill a strategic niche.

Note also that

CAPTAINS are given the same number of points as the team drafted in the same sequence. For example, the third CAPTAIN gets the same number of points as the third draft. Numerical analysis supports the idea that CAPTAINS are about as strong in performance as equivalently drafted teams. As an additional minor benefit, awarding the same points for CAPTAINS and equivalent drafts lubricates the acceptance of draft offers between CAPTAINS, which gives teams out of the top 8 the chance to experience being CAPTAINS themselves.

11.1.3 Playoff Performance

This attribute measures team performance as part of an

.

Teams that advance to at least

12 earn Double Elimination (DE) Points per the formula below, where β is defined in Table 11‑4.

ALLIANCE Finish	β
1st Place (Winners)	20
2nd Place (Finalists)	20
3rd Place (loser of MATCH 13)	13
4th Place (loser of MATCH 12)	7

In most cases, unless a BACKUP is recruited, a team plays 100% of the DE

won by their , thus their DE Points simply equal β. If a team does not play 100% of the DE won by their , their DE Points equal their β value multiplied by the percentage of DE won by their in which that team participated. If the result is not a whole number, the value is rounded up to the nearest integer.

Teams on the winning

are awarded additional Finals Points, which are 5 points for each Finals won and in which the team participated, up to a maximum of 10 points.

The maximum number of Playoff Performance Points a team can earn is 30 (20 DE points + 10 Finals Points).

11.1.4 Awards

This attribute measures team performance with respect to team awards judged at the event.

The points earned for team awards in this system are not intended to capture the full value of the award to the team winning the award, or to represent the full value of the award to FIRST. In many ways, the team’s experience in being selected for awards, especially the FIRST Impact Award, the Engineering Inspiration Award, and the Rookie All Star Award (which is optional for District Championship events), is beyond measure, and could not be fully captured in its entirety by any points-based system. Points are being assigned to awards in this system only to help teams recognize that FIRST continues to be “More than

®,” with the emphasis on our cultural awards, and to assist in elevating award-winning teams above non-award-winning teams in the ranking system.

Teams only get points for team awards judged at the event. If an award is not judged, is not for a team (e.g. the Dean’s List Award) or is not judged at the event (e.g. Safety Animation Award, sponsored by UL), no points are earned.

11.1.5 Team Age

This attribute recognizes the difficulty in being a rookie or relatively new team.

Points are awarded to 2024 and 2025 rookie teams in recognition of the unique challenges teams face in those early years, and to increase the chance that they will make it to the District Championship to compete with their

. Like our dedicated Rookie awards, these additional points are intended to recognize and motivate newer participants in FIRST Robotics Competition. These points are awarded once at the beginning of the season. Rookie year is calculated based on the year in which FIRST recognizes the team as a rookie.

11.1.6 Regional Participation

District teams neither earn points for their actions at any Regionals, nor are eligible for any FIRST Championship qualifying benefits at that Regional (awards, etc.).

11.2 District Championship Eligibility

A team competing in a District qualifies for their District Championship by meeting 1 of the following criteria:

A. District FIRST Impact Award Winner,

B. District Ranking (based on total points earned at their first 2 home District events as detailed in section 11.1 District Events),

C. District Engineering Inspiration winner (qualifies to compete for the award only), and

D. District Rookie All Star winner (qualifies to compete for the award only).

The capacity of each District Championship is shown in Table 11‑5. Each District determines the number of teams that qualify for their District Championship. These limits are based on factors including but not limited to the total number of teams in the District, available venue capacity, etc.

District Championship	Capacity	Divisions
FIRST Chesapeake District Championship	54	1
FIRST in Michigan State Championship	160	4
FIRST in Texas District Championship	90	2
FIRST Indiana State Championship	38	1
FIRST Israel District Championship	45	1
FIRST Mid-Atlantic District Championship	60	1
FIRST North Carolina State Championship	40	1
FIRST Ontario Provincial Championship	100	2
FIRST South Carolina State Championship	35	1
New England District Championship	96	2
Pacific Northwest District Championship	45	1
Peachtree District State Championship	50	1

11.3 District Championships with Multiple Divisions

If a District Championship has too many teams to allow all teams 12 Qualification

, then the event hosts multiple divisions. These events have 2 or 4 divisions (based on the number of teams participating, see Table 11‑5) with approximately 40–60 teams in each division. Teams are assigned divisions by FIRST using a process developed by FIRST in Michigan and balances need for accessible seating between Divisions.

The process employs a “brute force iterative randomizer” and is executed as follows:

• The district team list is sorted in order of cumulative district points earned as described in section 11.1 District Events.
• The list is divided into quartiles based on rank (e.g. the first quartile has the top 25% ranked teams).
• Division assignments are randomly generated using equal contributions from each quartile.
• 3 criteria are calculated for each division:
• a. average strength: the arithmetic mean of the district point values of teams in a division
• b. distribution of strength: the Signal to Noise Ratio (SNR) of the district point values of teams in a division. SNR is calculated as follows:

σ = standard deviation of the district points in a division

• c. distribution of strength for “top” teams: The SNR of the district point values of teams in the first quartile of a division
• The 3 criteria for each division are compared to the other division(s). If the difference between the division’s value and any other division’s value exceeds the limits in Table 11‑6, the criteria is not met.

	2 divisions	4 divisions
Average strength	1	2
Distribution of strength	1	2.5
Distribution of strength for “top” teams	1.5	2

• If all 3 criteria met, event organizers publish the assignments. If any of the 3 criteria are not met, assignments are rejected, and the process returns to Step 3.

11.4 District Championship Playoffs

In these cases:

• Division winning
  ALLIANCES
  play each other in District Championship Playoffs, employing the brackets shown in Figure 11‑1 and Figure 11‑2 (and detailed in Table 11‑7) that corresponds to their District, until a winning
  ALLIANCE
  for the event is determined.

Round	MATCH	Upper/ Lower			Gap (min)	Gap (min)	Next MATCH ( MATCH # ( ALLIANCE color))	Next MATCH ( MATCH # ( ALLIANCE color))
Blue	Red	Blue	Red	Winner	Loser
1	1	Upper	B	A			M3 ( R )	M4 ( R )
2	Upper	D	C	M3 (B)	M4 (B)
15-minute break	15-minute break	15-minute break	15-minute break	15-minute break	15-minute break	15-minute break	15-minute break	15-minute break
2	3	Upper	W2	W1	17m	24m	M6 ( R )	M5 ( R )
4	Lower	L2	L1	24m	31m	M5 (B)
15-minute break	15-minute break	15-minute break	15-minute break	15-minute break	15-minute break	15-minute break	15-minute break	15-minute break
3	5	Lower	W4	L3	17m	24m	M6 (B)
15-minute break	15-minute break	15-minute break	15-minute break	15-minute break	15-minute break	15-minute break	15-minute break	15-minute break
Finals	6		W5	W3	17m	44m	M7	M7
15-minute break	15-minute break	15-minute break	15-minute break	15-minute break	15-minute break	15-minute break	15-minute break	15-minute break
Finals	7		W5	W3	17m	17m	M8*	M8*
15-minute break	15-minute break	15-minute break	15-minute break	15-minute break	15-minute break	15-minute break	15-minute break	15-minute break
Finals	8*		W5	W3	17m	17m

• if required

• Each team on a Champion
  ALLIANCE
  of a 2-Division District Championship Playoff tournament earns 10 points.
• For a 4-Division District Championship Playoff tournament, each team on a Champion
  ALLIANCE
  earns 20 points and each team on a Finalist
  ALLIANCE
  receives 10 points.
• If any of these
  ALLIANCES
  has recruited a BACKUP TEAM, these points are divided amongst the teams as described in section 11.1.3 Playoff Performance.
• If an
  ALLIANCE
  in a District Championship Playoff has not yet recruited a BACKUP TEAM per section 10.6.3 BACKUP TEAMS, the
  ALLIANCE
  CAPTAIN may bring in only the highest ranked team from their division’s BACKUP POOL to join its
  ALLIANCE
  .

11.5 FIRST Championship Eligibility

Each District determines the number of Dean’s List Finalists, FIRST Impact Awards, Rookie All Star Awards, and Engineering Inspiration Awards to present at their District Championship, within a range established by FIRST. The team counts are based on the team representation of the respective District at the Championship. For the awards, ranges are developed by using ratios agreed upon by FIRST and District Leadership. These ranges allow each District to represent their own community as they see fit.

• For the FIRST Impact Award, the ratios range from one FIRST Impact Award team for every 18 Championship District teams to one FIRST Impact Award team for every nine Championship District teams.
• For the Dean’s List Finalist Award, the ratios range from one Dean’s List Finalist for every nine Championship District teams to one Dean’s List Finalist for every six Championship District teams.
• All Districts, regardless of FIRST Championship Slot allocation, may award one or two Engineering Inspiration and Rookie All-Star Awards.

The following teams competing in the District model earn a Merit-Based Qualifying slot:

• District Championship
  • o FIRST Impact Award Winners
  • o Engineering Inspiration Award Winners
  • o Rookie All-Star Winners (the judges can decide if they present this award or not)
  • o Winning
    Alliance
    members
• as many teams in District-points total order to fill the Allocated FIRST Championship slots granted per the table below.

Districts receive the percentage of 'available slots' at FIRST Championship, rounded up to the nearest whole slot, equal to the percentage of teams they have in their District compared to the total of all FIRST Robotics Competition teams. 'Available slots' are calculated by taking the total number of slots at FIRST Championship and subtracting the number of pre-qualified teams. This overall calculation uses a ‘snapshot’ of teams that have registered and paid as of three weeks after initial season payment was due.

District	Allocated FIRST Championship Slots	FIRST Impact Award Winners	Dean's List Award Finalists	Engineering Inspiration Award Winners	Rookie All-Star Award Winners	Woodie Flowers Award Finalists
FIRST Chesapeake	17	2	3	2	1	2
FIRST in Michigan	80	4	13	1	2	3
FIRST in Texas	28	2	5	2	2	2
FIRST Indiana Robotics	12	1	2	1	1	1
FIRST Israel	10	1	2	1	1	1
FIRST Mid-Atlantic	23	3	4	2	1	2
FIRST North Carolina	14	1	2	2	2	1
FIRST South Carolina**	5	1	2	1	1	1
NE FIRST	31	3	5	2	1	2
Ontario	22	2	4	1	1	2
Pacific Northwest	22	2	4	2	1	2
Peachtree	12	1	2	2	1	1

*Due to its size, FIRST South Carolina does not have enough Championship slots for this method to work. The following teams will receive automatic invitations to the 2025 FIRST Championship from the FIRST South Carolina State Championship:

• Winning
  Alliance
  Captain
• Winning
  Alliance
  First Pick
• FIRST Impact Award Winner
• Engineering Inspiration Award Winner
• Next highest District Points